Billet Aluminum Block

Billet aluminum block

  Signialuminium specilizes in procesing billet aluminum block, we have the slitter line, slab cutting line, shear line. The equipments include sheet shear machine, plate sawing and cutting machine, tube and bar sawing machine and so on. We can slit, cut across, longitudinal cutting, sawing, shearing and coated with plastic. We can offer the exactest billet aluminum block which is the most economical and reasonable.


 
  Billet aluminum block, offered by us, are manufactured using high quality Aluminum,are made available in different dimensions as per the requirement of the clients. Owing to their  good physical properties, processability and corrosion resistance ,and with high strength, high hardness ,low sensitivity to crack,etc,the billet aluminum block can be used for different engine,
Mold,Aircraft parts,aircraft frame,billet water neck,irrigation pipe,engineering parts,etc.


 
General Specification

Alloy	Temper	Specification (mm)
		Thickness	Width	Length
2A12,2024, 3003,5052,5083, 5086,5182,5454,5754,6061,6082,6063,7075	H111, H112, H116,T4, T6, T651	6~300mm	100~2600	500~16000
Remark: special specifications can be produced accordingly to your requirement.

 
Main Aluminum Alloy Chemical Composition

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Ni		Zn		Ti	Others		Alu min
												each	Total
2A12	0.50	0.50	3.8~4.9	0.3~0.9	1.2~1.8	-	0.1		0.3		0.15	0.05	0.10	remainder
2024	0.50	0.50	3.8~4.9	0.3~0.9	1.2~1.8	0.1	-		0.25		0.15	0.05	0.15	remainder
3003	0.6	0.7	0.05-0.20	1.0-1.5	-	-	-		0.10		-	0.05	0.15	remainder
5052	0.25	0.40	0.10	0.10	2.2~2.8	0.15~0.35	-		0.1		-	0.05	0.15	remainder
5083	0.40	0.40	0.10	0.4~1.0	4.0~4.9	0.05~0.25	-		0.25		0.15	0.05	0.15	remainder
5086	0.40	0.50	0.10	0.20~0.7	3.5~4.5	0.05~0.25		-		0.25	0.15	0.05	0.15	remainder
5182	0.20	0.35	0.15	0.20-0.50	4.0-5.0	0.10		-		0.25	0.10	0.05	0.15	remainder
5454	0.25	0.40	0.10	0.50-1.0	2.4-3.0	0.05-0.20		-		0.25	0.20	0.05	0.15	remainder
5754	0.40	0.40	0.10	0.50	2.6-3.6	0.30		-		0.20	0.15	0.05	0.15	remainder
6061	0.4~0.8	0.7	0.15~0.40	0.15	0.8~1.2	0.04~0.35		-		0.25	0.15	0.05	0.15	remainder
6082	0.7-1.3	0.50	0.10	0.40-1.0	0.6-1.2	0.25		-		0.20	0.10	0.05	0.15	remainder
6063	0.20-0.6	0.35	0.10	0.10	0.45-0.9	0.10		-		0.10	0.10	0.05	0.15	remainder
7075	0.40	0.50	1.2 ~2.0	0.30	2.1~2.9	0.18~0.28		-		5.1~6.1	0.20	0.05	0.15	remainder

 
Main Aluminum Alloy Physical property

Alloy	Temper	Specified Thickness mm		Tensile strength Rm MPa		Yield strength Rp 0.2 MPa		Elongation min.		Bend Radius		Hardness
		over	Up to	Min.	Max.	Min.	Max.	A50mm	A	180°	90°	HBW
3003	O/H111	6.0	12.5	95	135	35		24			1.5t	28
		12.5	50.0	95	135	35			23			28
	H112	≥ 6,0	12,5	115	-	70		10				35
		12,5	80,0	100	-	40			18			29
5052	O/H111	6	12.5	165	215	65	-	19	-	-	2.0t	46
		12.5	80.0	165	215	65	-	-	18	-	-	46
	H112	6	12.5	190	-	80	-	7	-	-	-	55
		12.5	40.0	170	-	70	-	-	10	-	-	47
		40.0	80.0	170	-	70	-	-	14	-	-	47
5083	0/H111	6.3	12.5	270	345	115	-	16	-	-	-	75
		12.5	50.0	270	345	115	-	-	15	-	-	75
		50.0	80.0	270	345	115	-	-	14	-	-	73
		80.0	120.0	260	-	110	-	-	12	-	-	70
		120.0	200.0	255	-	105	-	-	12	-	-	69
		200.0	250.0	250	-	95	-	-	10	-	-	69
		250.0	300.0	245	-	90	-	-	9	-	-	69
	H112	6.0	12.5	275	-	125	-	12	-	-	-	75
		12.5	40.0	275	-	125	-	-	10	-	-	75
		40.0	80.0	270	-	115	-	-	10	-	-	73
		80.0	120.0	260	-	110	-	-	10	-	-	73
	H116	6.0	12.5	305	-	215	-	12	-	-	4.0t	89
		12.5	40.0	305	-	215	-	-	10	-	-	89
		40.0	80.0	285	-	200	-	-	10	-	-	83
5086	0/H111	6.3	12.5	240	310	100	-	17	-	-	2.5t	65
		12.5	150.0	240	310	100	-	-	16	-	-	65
	H112	6.0	12.5	250	-	105	-	8	-	-	-	69
		12.5	40.0	240	-	105	-	-	9	-	-	65
		40.0	80.0	240	-	100	-	-	12	-	-	65
	H116	6.0	12.5	275	-	195	-	10	-	-	3.5t	81
		12.5	50.0	275	-	195	-	-	9	-	-	81
5182	0/H111	0,5	1.5	255	315	110	-	12	-	1.0t	-	69
		1.5	3.0	255	315	110	-	13	-	1.0t	-	69
5454	0/H111	6,0	12.5	215	275	85	-	18		-	2.5t	58
		12,5	80,0	215	275	85	-	-	16	-		58
	H112	≥ 6,0	12,5	220	-	125	-	8				63
		12,5	40,0	215	-	90	-		9			59
		40,0	120,0	215	-	90	-		13			59
5754	0/H111	6,0	12,5	190	240	80		18			2,0 t	52
		12,5	100,0	190	240	80			17			52
	H112	≥ 6,0	12,5	190		100		12				62
		12,5	12,5	190		90			10			58
		12,5	40,0	190		80			12			52
		40,0	80,0	190		80			14			52
2024	O	6.0	9.0	-	220	-	140	13	-	-	2.5t	55
		9.0	12.5	-	220	-	140	13	-	-	4.0t	55
		12.5	25.0	-	220	-	-	-	11	-	-	55
	T3/T351	6.0	12.5	440	-	290	-	13	-	-	-	124
		12.5	40.0	430	-	290	-	-	11	-	-	122
		40.0	80.0	420	-	290	-	-	8	-	-	120
		80.0	100.0	400	-	285	-	-	7	-	-	115
		100.0	120.0	380	-	270	-	-	5	-	-	110
		120.0	150.0	360	-	250	-	-	5	-	-	104
6061	O	6,0	12,5		150		85	16			2,0 t	40
		12,5	25,0		150				16			40
	T4/T451	6,0	12,5	205		110		18			4,0 tb	58
		12,5	40,0	205		110			15			58
		40,0	80,0	205		110			14			58
	T42	6,0	12,5	205		95		18			4,0 tb	57
		12,5	40,0	205		95			15			57
		40,0	80,0	205		95			14			57
	T6 T651 T62	6,0	12,5	290		240		9			5,0 tb	88
		12,5	40,0	290		240			8			88
		40,0	80,0	290		240			6			88
		80,0	100,0	290		240			5			88
		100,0	150,0	275		240			5			84
		150,0	250,0	265		230			4			81
		250,0	350,0	260		220			4			80
6082	O	6,0	12,5		150		85	17			2,5 t	40
		12,5	25,0		155				16			40
	T4/T451	6,0	12,5	205		110		14			4,0 t b	58
		12,5	40,0	205		110			13			58
		40,0	80,0	205		110			12			58
	T42	6,0	12,5	205		95		14			4,0 t b	57
		12,5	40,0	205		95			13			57
		40,0	80,0	205		95			12			57
	T6 T651 T62	6,0	12,5	300		255		9			6,0 t b	91
		12,5	60,0	295		240			8			89
		60,0	100,0	295		240			7			89
		100,0	150,0	275		240			6			84
		150,0	175,0	275		230			4			83
		175,0	350,0	260		220			2
7075	O	6.0	12.5	-	275	-	145	10	-	-	4.0t	55
		12.5	75.0	-	275	-	-	9	-	-	-	55
	T6 T651 T62	6.0	12.5	540	-	- 460	-	8	-	-	-	160
		12.5	25.0	540	-	470	-	-	6	-	-	161
		25.0	50.0	530	-	460	-	-	5	-	-	158
		50.0	60.0	525	-	440	-	-	4	-	-	155
		60.0	80.0	495	-	420	-	-	4	-	-	147
		80.0	90.0	490	-	390	-	-	4	-	-	144
		90.0	100.0	460	-	360	-	-	3	-	-	135
		100.0	120.0	410	-	300	-	-	2	-	-	119
		120.0	150.0	360	-	260	-	-	2	-	-	104
	T652	150	200	360	-	260	-	-	2	-	-	-
		200	300	360	-	260	-	-	2	-	-	-

 


Applications：
The billet aluminum block can be used for different engine,
Mold,Aircraft parts,aircraft frame,billet water neck,irrigation pipe,engineering parts,etc.

---