NEWS

INFORMATION

Tel:

86 17344894490

Address ：Zhengzhou City, Henan Province, China
Tel:86 17344894490
Email：service@signialuminium.com

Location ： Home/Aluminium Profile/ Aluminum Block Parts

Aluminum Block Parts

Last Updated ：2023/07/03

Aluminium Block for Different Parts

Signialuminium specilizes in procesing Aluminium block for different parts , we have the slitter line, slab cutting line, shear line. The equipments include sheet shear machine, plate sawing and cutting machine, tube and bar sawing machine and so on. We can slit, cut across, longitudinal cutting, sawing, shearing and coated with plastic. We can offer the exactest Aluminium block for different parts which is the most economical and reasonable.

Aluminium block for different parts , offered by us, are manufactured using high quality Aluminum,are made available in different dimensions as per the requirement of the clients. Owing to their good formability, high corrosion resistance, good weldability,good physical properties, processability ,and with high strength, high hardness ,low sensitivity to crack,etc,the Aluminium block can be used for different parts.

General Specification

Alloy	Temper	Specification (mm)
		Thickness	Width	Length
3003,5052 5182, 6061,6063,6082	H111, H112, H116,T4, T6, T651	6~300mm	100~2600	500~16000
Remark: special specifications can be produced accordingly to your requirement.

Main Aluminum Alloy Chemical Composition

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Ni		Zn		Ti	Others		Alu min
Alloy	Si	Fe	Cu	Mn	Mg	Cr	Ni		Zn		Ti	each	Total	Alu min
3003	0.6	0.7	0.05-0.20	1.0-1.5	-	-	-		0.10		-	0.05	0.15	remainder
5052	0.25	0.40	0.10	0.10	2.2~2.8	0.15~0.35	-		0.1		-	0.05	0.15	remainder
5182	0.20	0.35	0.15	0.20-0.50	4.0-5.0	0.10		-		0.25	0.10	0.05	0.15	remainder
6061	0.4~0.8	0.7	0.15~0.40	0.15	0.8~1.2	0.04~0.35		-		0.25	0.15	0.05	0.15	remainder
6082	0.7-1.3	0.50	0.10	0.40-1.0	0.6-1.2	0.25		-		0.20	0.10	0.05	0.15	remainder
6063	0.20-0.6	0.35	0.10	0.10	0.45-0.9	0.10		-		0.10	0.10	0.05	0.15	remainder

Main Aluminum Alloy Physical property

Alloy	Temper	Specified Thickness mm		Tensile strength Rm MPa		Yield strength Rp 0.2 MPa		Elongation min.		Bend Radius		Hardness
Alloy	Temper	over	Up to	Min.	Max.	Min.	Max.	A50mm	A	180°	90°	HBW
3003	O/H111	6.0	12.5	95	135	35		24			1.5t	28
	O/H111	12.5	50.0	95	135	35			23			28
	H112	≥ 6,0	12,5	115	-	70		10				35
	H112	12,5	80,0	100	-	40			18			29
5052	O/H111	6	12.5	165	215	65	-	19	-	-	2.0t	46
	O/H111	12.5	80.0	165	215	65	-	-	18	-	-	46
	H112	6	12.5	190	-	80	-	7	-	-	-	55
		12.5	40.0	170	-	70	-	-	10	-	-	47
		40.0	80.0	170	-	70	-	-	14	-	-	47
5182	0/H111	0,5	1.5	255	315	110	-	12	-	1.0t	-	69
5182	0/H111	1.5	3.0	255	315	110	-	13	-	1.0t	-	69
6061	O	6,0	12,5		150		85	16			2,0 t	40
	O	12,5	25,0		150				16			40
	T4/T451	6,0	12,5	205		110		18			4,0 tb	58
		12,5	40,0	205		110			15			58
		40,0	80,0	205		110			14			58
	T42	6,0	12,5	205		95		18			4,0 tb	57
		12,5	40,0	205		95			15			57
		40,0	80,0	205		95			14			57
	T6 T651 T62	6,0	12,5	290		240		9			5,0 tb	88
		12,5	40,0	290		240			8			88
		40,0	80,0	290		240			6			88
		80,0	100,0	290		240			5			88
		100,0	150,0	275		240			5			84
		150,0	250,0	265		230			4			81
		250,0	350,0	260		220			4			80
6082	O	6,0	12,5		150		85	17			2,5 t	40
	O	12,5	25,0		155				16			40
	T4/T451	6,0	12,5	205		110		14			4,0 t b	58
		12,5	40,0	205		110			13			58
		40,0	80,0	205		110			12			58
	T42	6,0	12,5	205		95		14			4,0 t b	57
		12,5	40,0	205		95			13			57
		40,0	80,0	205		95			12			57
	T6 T651 T62	6,0	12,5	300		255		9			6,0 t b	91
		12,5	60,0	295		240			8			89
		60,0	100,0	295		240			7			89
		100,0	150,0	275		240			6			84
		150,0	175,0	275		230			4			83
		175,0	350,0	260		220			2

Applications：
The Aluminium block can be used for different parts.