- Transformer Aluminium Strip
- Color Coated Aluminium Strip
- Aluminium Jacketing Insulation Coil
- PCB Entry Aluminium Board Strip
- Aluminum Plastic Composite Strip
- Aluminium Slit Strip
- Window Shutter Aluminium Strip
- Aluminium Corner Strip
- Aluminium Air Duct Strip
- Car License Aluminium Strip
- Heat Exchange Aluminium Strip
NEWS
INFORMATIONTel:
86 17344894490 Location ： Home/Aluminum Strip/ 1100 3105 3003 Aluminum Roll Jacketing Coil
1100 3105 3003 Aluminum Roll Jacketing Coil
Last Updated ：2023/07/03
1100 3105 3003 Aluminum Roll Jacketing Coil
Aluminum Roll Jacketing is the premier protective outer surface covering for mechanical insulation systems including pipe, vessels, and equipment. It protects the insulation and underlying pipe/vessel from physical damage, UV exposure, corrosive atmospheres, and water.
Aluminum Roll Jacketing is manufactured from alloys 3105 and 3003, conforming to ASTM B-209 designation, half-hard temper (H-14) and heavier gauges-hard (H-12 lock-forming quality). Commercially pure aluminum is relatively soft as structural material. Its strength can be greatly improved by alloying aluminum with small percentages of one or more other elements such as manganese, silicon, copper, magnesium, or zinc. Additional strength can be achieved by cold working, such as cold rolling.
1100 3105 3003 Aluminum Roll Jacketing has a bare outer surface and comes standard with a 3 mil thick polyfilm moisture barrier. This barrier is heat-laminated to the interior surface to help prevent corrosion of the jacketing and the underlying metal pipe, vessel, or equipment.
1100 3105 3003 Aluminum Roll Jacketing Product options:
Technical Features of Alumnum Insulation Roll Coil
WIDTH: 1000 mm-1500 mm
THICKNESS: 0,3- 2 mm.
INTERNAL DIAMETER: 305mm, 405mm, 505mm, with paper core or without core.
OUTSIDE DIAMETER (øext) According to coil weight and finish
Most common coils 125 – 150 – 250 – 300 – 500 – 1000 – 2000 – 3000 – 4000 meters
FINISH Mill finish, Stucco
AVAILABLE ALLOYS 1100, 3003, 3105
1100 3105 3003 Aluminum Roll Jacketing Thickness Information:
- 0.4mm: Considered the standard for industrial use and recommended on pipelines up to 24" O.D., which includes the insulation. Primarily used to protect piping, vessels, and tanks that are less than 8 feet in diameter.
- 0.5mm: Applicable for insulation lines up to 36" O.D., including insulation. Primary use to protect towers, vessels, and tanks with a diameter greater than 8 feet.
- 0.6mm: Heavier gauge roll jacketing where extra strength and protection is required.
- 0.8mm: For areas where extra protection is required, or in custom fabrication of Box covers, tank heads, or heavy wear areas.
Signi Aluminum Insulation Jacketing is manufactured from alloys 3105 and 3003, conforming to ASTM B-209 standards. Aluminum jacketing is suitable for most general industrial applications. It will keep your insulation dry and functional. Aluminum jacketing has a Moisture Retarder. The retarder prevents galvanic or chemical corrosion at the metal-insulation interface.
Aluminum jacketing is recommended for insulated piping, tanks and vessels.
Signi's Aluminum jacketing is available with a smooth, stucco embossed, or corrugated finish.
